Compressed Sheet - Carbon Fibre High Performance Compressed With Buna-N Nitrile Binder


Style 7015


Compressed Sheet Carbon Fibre High Performance Compressed With Buna-N Nitrile Binder Style 7015 is a dense carbon fibre reinforced compressed sheet. It has a special high temperature anti-stick agent applied to both sides. This material has broad chemical resistance and high tensile strength. It’s excellent resistance to hot creep relaxation at elevated stress loads makes this a great gasket sheet. Style 7015 is an ideal high performance service gasket material.

Physical operties

Temperature
1000°F Maximum / 650°Continuous / 550° Steam

Pressure
2000 PSI

Color
Aqua

Composition
Carbon Fibre

pH
2 - 14

Density
1.6 Spec. Gravity

PxT Values
1/16" - 700,000
3/32" - 360,000

ASTM F 104 Tests 1/32" Thick

F 38 B Creep Relaxation
22 Hrs @ 212°F (100°C) 14.7%
22 Hrs @ 392°F (200°C) 24.9%

F 146 Thickness Increase
Oil #3, 5 Hrs @ 300°F < 5%
Fuel B, 5 Hrs @ 73°F < 5%

F 36 A Compressibility
5000 PSI Gasket Load
9.5% + 1.5%

F 36 A Recovery
55%

F 152 Tensile Strength
1825 PSI

DIN 3535 Part 6 Gas Leak Rate
Nitrogen @ 580 PSI/Gasket Load 4640 PSI
.10 cc/min

DIN 52913 Stress Relaxation @ 7250 PSI (50 MPA)
16 Hrs @ 347°F (175°C) > 5365 PSI (37 MPA)
16 Hrs @ 572°F (300°C) > 4350 PSI (30 MPA)

Hot Compression Test
7250 PSI @ 572°F (300°C) 16% Total
7250 PSI @ 68°F (20°C) 9% Total
(1/16" Thickness Used For Testing)

As in all compressed sheets the P x T values decrease significantly as the thickness increases. Our maximum temperature, pressure and P x T values cannot be exceeded.
Values for DIN flanges approximately 10% less.


Thickness	1/64", .020", 1/32", 1/16", 3/32", 1/8"
Sheet Sizes (Additional Sizes Available)	60" x 60", 60" x 120", 80" x 80"

Phelps Industrial Products, Inc., 6300 Washington Boulevard, Elkridge, Maryland 21075-5397