spacer Phelps Industrial Products, Inc. spacer
spacer Home Compressed
                  Gasket O Rings, Molded Parts Fast Fix spacer
spacer Contact
                  Us Gasket Material Metal Gaskets Additional Products spacer
spacer Gaskets Compression Packing Marine Products Cautions & Waranty spacer
spacer spacer spacer
Style 2024
 
Pure CPL Fiber

Centerlock® braided from pure CPL fiber. This packing is comparable to GFO® fiber  in performance but at a lower cost.

CPL fiber is made of: Carbon, a high purity graphite; Polytetrafluroethylene, PTFE; and high temperature inert Lubricant.

This unique packing has a graphite content of over 50%. That means CPL fiber is one of only two yarns to achieve this high graphite content. The end result of this high graphite content is longer wear, better heat transfer, and a broad pH range. Less than 50% PTFE in the yarn makes this packing kinder to the shaft while retaining good abrasion resistance.

Base Material
Graphite/PTFE Yarn

Shape
Square

Temperature
-400oF/-240oC to 550oF/288oC

Lubricant
High Temperature Inert

pH
0-14

Shaft Speed
4912 FPM/25 M/Per Sec

Applications
Best general service high speed pump packing Air, water, sea water, brines, superheated steam, sludges, slurries, waste, petroleum oils, petroleum fuels, solvents, chemicals, liquified gas.

Advantages
Testing between CPL and GFO® fibers have shown the products are equivalent in performance. Tests include leak rate, heat transfer and elevated temperature yarn shrinkage.

Maximum Size
2"

Feet Per Pound
1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 7/8" 1"
105.00 45.25 23.58 15.72 10.13 7.86 6.00 4.73 3.80 3.22 2.70 1.99 1.52
GFO® is a registered trademark of W.L. Gore & Associates
 
 
 
 
 
 
 
 
 
 
 
 
Phelps Industrial Products, Inc., 6300 Washington Boulevard, Elkridge, Maryland 21075-5397