The resilient core evenly spreads wear over the packing set when gland follower pressure is applied. This packing was especially designed for pumps where there is an axial or elliptical shaft run out. Made with a core of Style 7175, ZZR765 spec grade silicone, Style 2056's core offers a combination of the highest chemical resistance and temperature ability. The outside braided yarn is a combination of graphite fluorocarbon and oil to promote the maximum sealing and wear resistance. Style 2056 also makes an excellent door gasket.

Base Material
CPL Graphite/PTFE Yarn
With 7165 Silicone Core

Lubricant
High Temperature Inert

Temperature
-104F to 500F/260C

pH
1-14

Applications
Agitators mixers, worn pumps with an axial or elliptical run out handling water, waste water, brines, oils also static door or lid gaskets.

Advantages
The silicone core allows the packing to continually seal on pumps that are less than perfect mechanical conditions.