spacer Phelps Industrial Products, Inc. spacer
spacer Home Compressed Gasket O Rings, Molded Parts Fast Fix spacer
spacer Contact Us Gasket Material Metal Gaskets Additional Products spacer
spacer Gaskets Compression Packing Marine Products Cautions & Waranty spacer
spacer spacer spacer
Style 9816
 


Silicone Sealant

This product can be used for gasketing and as an adhesive. It sticks to metal and glass surfaces. For best results clean with a solvent such as xylol, toluol or methyl ethyl ketone. Style 9816 is 100% silicone.
 
Colors: Clear, White, Black, Blue, Bronze, Beige, Aluminum
Processing:
Temperature Range +500F to -80F
Tooling Time 5 - 10 minutes
Tack Free Time @ 75F (24C) 50% RH 15 minutes
Run on Sag NiL
Shelf Life Stored @ or Below 90F (32C) 1 Year
Physicals:
Durometer (After 7 Days @ 77F (25C) + 50% RH) 25
Tensile Strength, PSI (Mpa) 350 (1.9)
Elongation 500%
Specific Gravity 1.04
Tear Strength PPI (N/m) 30952.5 (10.2)
Meets Following Specifications:
FDA Criteria Pass
USDA Criteria Pass
NSF Std. 51 Pass
UL Approved
US Federal Specifications:
TT-S001543A Pass
TT-S-00230C Pass
Canadian Specifications:
19-GP-9MA, Type 1 Pass
Electrical Properties - Cured 7 Days @ 

77F (25C) + 50% RH)

CTM 0114 Dielectric Strength, Volts/Mil 390
CTM 0112 Dielectric Constant At

100 Hz

100 KHz


2.53 

2.49

CTM 0112 Dielectric Factor At

100 Hz

100 KHz


0.0087 

0.00307

CTM 0249 Volume Resistivity, ohm-cm 1.70 x 1014
Note: Solvent use requires adequate ventilation. Avoid heat, sparks and open flames. Can be stored at or below 90F (32C). 

Packaging - Available In
Caulking Tubes 10.1 Oz Squeeze Tubes 2.5 Oz
12 Per Case or Single Tubes 12 Per Case

5 Gallon Pails and 55 Gallon Drums are available by special order.

 
 
 
 
 
 
 
 
 
 
 
 
Phelps Industrial Products, Inc., 6300 Washington Boulevard, Elkridge, Maryland 21075-5397